Configuring The Radius Vendor-Specific Attribute; Configuring The Ra Dius Vendor-Specific Attribute - D-Link NetDefend DFL-CP310 User Manual

Configuring the RADIUS Vendor-Specific Attribute

In this field...
Web Filtering
Over ride
HotSpot Access
Configuring the RADIUS Vendor-Specific Attribute
For detailed instructions and examples, refer to the "Configuring the RADIUS
Vendor-Specific Attribute" white paper.
To assign permissions to specific RADIUS-authenticated users
1. Create a remote access policy as follows:
a) Assign the policy's VSA (attribute 26) the SofaWare vendor code
(6983).
b) For each permission you want to grant, configure the relevant attribute
of the VSA with the desired value, as described in the table below.
For example, to assign the user VPN access permissions, set attribute number 2
to "true".
2. Assign the policy to the desired user or user group.
372
Do this...
Select this option to allow all users authenticated by the RADIUS server
to override Web Filtering.
This option only appears if the Web Filtering service is defined.
Select this option to allow the user to access the My HotSpot page.
This option only appears in DFL-CP310 with Power Pack.
D-Link NetDefend firewall User Guide