Restoring Traffic Shaper Defaults; Restoring T Raffic Shape R Defaults - D-Link NetDefend DFL-CP310 User Manual

Security vpn firewall netdefend secured by check point

Hide thumbs Also See for NetDefend DFL-CP310:

Table of Contents

Restoring Traffic Shaper Defaults

If desired, you can reset the Traffic Shaper bandwidth policy to use the four

predefined classes, and restore these classes to their default settings. For

information on these classe

Note: This will delete any additional classes you defined in Traffic

Shaper and reset all rules to use the Default class.

If one of the addi

cannot reset Traffic Shaper to defaults. You can determine whether

a class is in use

To restore Traffic Shaper defaults

Click Network in the main menu, and click the Traffic S

The Quality of Service Classes page appears.

Restore Defaults.

firmation message a

3. Click OK.

s and their defaults, see Predefined QoS Classes on

tional classes is currently used by a rule, you

or not, by viewing the

D-Link NetDefend firewall User Guide

Table of Contents