You can configure how Cisco IOS DOS attacks should be handled.
Tab
le 44: Cisco IOS DOS
In this field...
Action
T
rack
N
umber of Hops to Protect
Chapter 9: Setting Your Security Policy
Do this...
Specify what action to take when a Cisco IOS DOS attack occurs,
by selecting one of the following:
•
Block. Block the attack. This is the default.
•
None. No action.
Specify whether to log Cisco IOS DOS attacks, by selecting one of
the following:
•
Log. Log the attack. This is the default.
•
None. Do not log the attack.
Type the number of hops from the enforcement module that Cisco
routers should
be protected.
The default value is 10.
Using SmartDefense
237