Setting Up Network Printers
Setting Up Network Printers
To set up a network printer
1. Connect the network printer to the NetDefend firewall.
See
N etwork Installation
T
2. Turn the printer on.
3. In the NetDefend Portal, click Setup in the main menu, and click the Printers
tab.
The Printers page appears. If the NetDefend firewall detected the printer, the
printer is listed on the page.
4. If the printer is not listed, check that you connected the printer correctly, then
click Refresh to refresh the page.
5. Write down the port number allocated to the printer.
424
on page 35.
T
D-Link NetDefend firewall User Guide