Configuring Syslog Logging - D-Link NetDefend DFL-CP310 User Manual

Configuring Syslog Logging

9. Click Next.
The Registration... screen appears.
The third Registration dialog box appears.
10. Click Finish.
Your NetDefend firewall is restarted and the Welcome page appears.

Configuring Syslog Logging

You can configure the NetDefend firewall to send event logs to a Syslog server
residing in your internal network or on the Internet. The logs detail the date and the
time each event occurred. If the event is a
by the firewall, the event details include t
destination port, and the protocol used for the communication attempt (for
example, TCP or UDP).
This same information is also available in the Event Log page (see Viewing the
Event Log on page 187).
logs, a Syslog server can store an unlimited number of logs.
servers can provide useful tools for managing your logs.
Note: Kiwi Syslog Daemon is freeware and can be downloaded from
http://www.kiwisyslog.com. For technical support, contact Kiwi Enterprises.
To configure Syslog logging
1. Click Setup in the main menu, and click the Logging tab.
384
communication attempt that was rejected
he source and destination IP address, the
However, while the Event Log can display hundreds of
Furthermore, Syslog
D-Link NetDefend firewall User Guide