To disable FTP command blocking
• In the Action drop-down list, select None.
All FTP commands are allowed, including those in the Blocked commands box.
To block a specific FTP command
1. In the Allowed commands box, select the desired FTP comman
2. Click Block.
The FTP command appears in the Blocked commands box.
3. Click Apply.
When FTP command blocking is enabled, the FTP command will be blocked.
To allow a specific FTP command
1. In the Blocked commands box, select the desired FTP command.
2. Click Accept.
The FTP command appears in the Allowed commands box.
3. Click Apply.
The FTP command will be allowed, regardless of whether FTP command
blocking is enabled or disabled.
Microsoft Netw
orks
This category includes File and Print Sharing.
Microsoft operating systems and Samba clients rely on Common Internet File
System (CIFS), a protocol for sharing files and printers. However, this protocol is
also w
idely used by worms as a means o
Chapter 9: Setting Your Security Policy
f propagation.
Using SmartDefense
d.
249