D-Link NetDefend DFL-CP310 User Manual page 233

In this field... Do this...
D estination Select the destination of the connections you want to allow or block.
To specify an IP address, select Specified IP and type the desired IP address
in the text box.
To specify an IP address range, select Specified Range and type the desired
IP address range in the fields provided. This option is not available in Allow
and Forward rules.
To specify th
Allow and Fo
To specify any destination except the NetDefend Portal and network
printers, select ANY.
Quality of Select the QoS class to which you want t
Service class
If Traffic Shaper is enabled, Traffic Shaper will handle these connections as
specified in the bandwidth policy for the selected
is not enabled, this setting is ignored. Fo
QoS classes, see Using Traf
This drop-down list only appears when defining an Allow rule or an Allow and
Forward
Log accepted Select this option to log the specified blocked or allowed connections.
connections /
By default, accepted connections are not logged, and blocked connections
Log blocked
are logged. You can modif
c onnections
Chapter 9: Setting Your Security Policy
e IP address, select This Gateway. This option is not available in
rward rules.
fic Shaper on page 151.
rule.
y this behavior by changing the check box's state.
o assign the specified connections.
QoS class. If Traffic Shaper
r information on Traffic Shaper and
Using Rules
217