Controlling the Appliance via the Command Line
You can view a list of supported commands using the command help.
For information on all commands, refer to the NetDefend CLI Reference Guide.
4. Click Go.
The command is implemented.
Using the Serial Console
Yo
u can connect a console to the NetDefend firewall, and use the consol
co
ntrol the appliance via the command lin
Note: Your terminal emulation software must be set to 57600 bps, N-8-1.
To
control the appliance via a console
1. Connect the serial console to your NetDefend firewall's serial port, using an RS-
232 Null modem cable.
For information on locating the serial port, see Rear Panel.
2. Click Network in the main menu, and click the Ports tab.
388
e.
D-Link NetDefend firewall User Guide
e to