D-Link NetDefend DFL-CP310 User Manual page 387

In this field...
Realm
Ti meout
RADIUS User
Permissions
Administr ator Level
Chapter 13: Managing Users
Do this...
If your organization us es RADIUS realms, type the realm to append to
RADIUS requests. The realm will be appended to the username as
follows: <username>@<realm>
For example, if you set the realm to "myrealm", and the user "JohnS"
attempts to log on to the NetDefend Portal, the NetDefend firewall will
send the R ADIUS server an authentication request with the username
"JohnS@myrealm".
This field is optional.
Type the interval of time in seconds between attempts to communicate
with the RADIUS server.
The default val ue is 3 seconds.
If the RADIUS VSA (Vendor-Specific Attribute) is configured for a user,
the fields in this area will have no effect, and the user will be granted
the permissions specified in the VSA.
If the VSA is not configured for the user, the permissions configured in
this area will be used.
Select the level of access to the NetDefend Portal to assign to all users
authenticated by the RADIUS server.
The levels are:
•
No Access: The user cannot access the NetDefend Portal
•
Read/Write: The user can log on to the NetDefend Portal and
modify system settings.
•
Read Only: The user can log on to the NetDefend Portal, but
cannot modify system settings.
The default level is No Access.
Using RADIUS Authentication
371