2.40. Snmp; Disallowed_Sender (Id: 03100001); Invalid_Snmp_Community (Id: 03100002) - D-Link DFL-260E Log Reference Manual

2.40. SNMP

2.40. SNMP
These log messages refer to the SNMP (Allowed and disallowed SNMP accesses) category.

2.40.1. disallowed_sender (ID: 03100001)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.40.2. invalid_snmp_community (ID: 03100002)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters
NOTICE
Disallowed SNMP from <peer>, disallowed sender IP
The sender IP address is not allowed to send SNMP data to the unit.
Dropping packet.
drop
If this sender IP address should have SNMP access to the unit, this
should be configured in the ACCESS section.
1
peer
Connection
NOTICE
Disallowed SNMP from <peer>, invalid community string
The SNMP community string is invalid.
drop
Make sure the entered SNMP community string is correct.
1
peer
Connection
446
Chapter 2. Log Message Reference