Configuring High Availability
Note: The s
always be connected and enabled on all gateways. Otherwise, m
may become active, causing unpredictable problems.
7. Complete the fields using the information the tabl
Click Apply.
8.
A success m
essage appears.
9.
If desired, configure W
connection.
This setting should be the same for all gateways. For further information, see
Using Internet Setup on page 63.
Table 14: High Availability Page Fields
In this field...
Priority
My Priority
Interface Tracking
Internet - Primary
124
ynchronization interface must be the same for all gateways, and must
AN HA for both the primary and secondary Internet
Do this...
Type the gateway's priority.
This must be an integer between 1 and 255.
Type the amount to reduce the gateway's priority if the primary Internet
connection goes down.
This must be an integer between 0 and 255.
ultiple appliances
e below.
D-Link NetDefend firewall User Guide