Download Print this page

Connecting To Your Network; Connecting To The Internet - D-Link DFL-1000 Quick Install Manual

Hide thumbs

Advertisement

In the event of difficulties you can restore the factory default settings with
the following command:
set system status reset
When you are finished with the console you can log out using the com-
mand:
quit

Connecting to Your Network

Connect the Internal Interface to an Internal Network Hub or Switch using
a straight Ethernet cable.The Link indicator will light up if the connection is
to a 100 megabit device.

Connecting to the Internet

Connect the External Interface to the Internet by running an Ethernet

Advertisement

loading

  Also See for D-Link DFL-1000

  Related Manuals for D-Link DFL-1000