Restart/Reset; Restoring System Settings To Factory Defaults - D-Link DFL-200 User Manual

Network security firewall

Hide thumbs Also See for DFL-200:

Table of Contents

Restart/Reset

Restarting the DFL-200

Follow these steps restart the DFL-200.

Step 1. Choose if you want to do a quick or full restart.

Step 2. Click Restart Unit and the unit will restart.

Use the following procedure to restore system settings to the factory defaults. This procedure

will possibly change the DFL-200 firmware version to a lower version if it has been upgraded.

Make sure you have the current firmware file available for upload to the device in the case

where the firmware version is defaulted to an older version.

Table of Contents

Netdefend dfl-200