Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Figure 6-28. Forwarding Table
To browse by MAC address, select MAC address in the Search by
field, enter the desired MAC address in the next field, and then
press FIND.
To browse by port number, select Port in the Search by field,
enter the desired port in the next field, and then press FIND.
A forwarding table containing Port, MAC Address, and Learned
status is located on the lower part of the screen.
Resetting the Switch
You can use the console interface to reset the Switch, either doing
a Restart System (which restarts the Switch and is identical to
powering the Switch off and back on again) or a Factory Reset to
Default Value (which sets all of the Switch's parameters to what
they were when the Switch was delivered from the factory).
Using the Console Interface
69
Advertisement
Table of Contents
