Gigabit Ethernet Switch User's Guide
Restart System
To perform a system reset, choose Restart System from the main
menu. Please note there is no confirmation query before the
system is rebooted.
Figure 6-29. Restart System screen
Factory Reset to Default Value
Before performing a factory reset, be absolutely certain that this is
what you want to do. Once the reset is done, all of the Switch's
settings stored in NV-RAM (including TCP/IP parameters, SNMP
parameters, the enabled/disabled settings of ports, security
settings, etc.) will be erased and restored to their factory default
settings.
1. Choose Factory Reset to Default Value from the main
menu. The following screen appears:
70
Using the Console Interface