Table of Contents
Advertisement
The default serial port settings are:
Baud Rate=9600
Data Bits=8
Flow Control=X on/X off
Parity=None
Stop Bits=1
The information is described as follows:
♦ Console Timeout Choose Never, 15 minutes, 30 minutes,
45 minutes, or 60 minutes for the desired refresh setting.
♦ Serial Port
The options for the current console port
setting are Console or Slip.
♦ Baud Rate Determines the serial port bit rate that will be
used the next time the Switch is restarted. Applies only
when the serial port is being used for out-of-band (SLIP)
management; it does not apply when the port is used for the
console port. Available speeds are 2400, 9600, 19,200 and
38,400 bits per second. The default setting in this Switch
version is 9600.
Web-Based Network Management
Gigabit Ethernet Switch User's Guide
85
Advertisement
Table of Contents
