Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
another is automatically forwarded by the switch, without
interfering with any other segments. This allows the total network
capacity to be multiplied, while still maintaining the same network
cabling and adapter cards.
For Fast Ethernet or Gigabit Ethernet networks, a switch is an
effective way of eliminating problems of chaining hubs beyond the
"two-repeater limit." A switch can be used to split parts of the
network into different collision domains, for example, making it
possible to expand your Fast Ethernet network beyond the 205
meter network diameter limit for 100BASE-TX networks. Switches
supporting both traditional 10Mbps Ethernet and 100Mbps Fast
Ethernet are also ideal for bridging between existing 10Mbps
networks and new 100Mbps networks.
Switching LAN technology is a marked improvement over the
previous generation of network bridges, which were characterized
by higher latencies. Routers have also been used to segment local
area networks, but the cost of a router and the setup and
maintenance required make routers relatively impractical. Today's
switches are an ideal solution to most kinds of local area network
congestion problems.
Features
The TEG-S40SX Gigabit Ethernet Switch was designed for easy
installation and high performance in an environment where traffic
on the network and the number of users increase continuously.
Switch features include:
Introduction
3
Advertisement
Table of Contents
