Table of Contents
Advertisement
the physical location of the Switch for administrative
purposes.
♦ System Contact Corresponds to the SNMP MIB II variable
, and is used to give the name and contact
sysContact
information for the person responsible for administering the
Switch.
The Configure Advanced Switch Features screen allows you to
enable or disable auto-partitioning on all ports as well as to enable
or disable head of line blocking prevention. Press ADVANCE
SETTINGS on the System Configuration window to access the
Configure Advanced Switch Features screen:
Figure 6-11. Configure Advanced Switch Features screen
The field you can set is:
♦ Head Of Line (HOL) Blocking Prevention If enabled, this
function is designed to prevent forwarding a packet to a
"blocking" port, that is, a port where an excess of packets are
queued up. Note that when a multicast packet or a packet with
an unknown destination address needs
Using the Console Interface
Gigabit Ethernet Switch User's Guide
43
Advertisement
Table of Contents
