Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Figure 6-16. STP Custom Setting screen
3. Change the Disabled setting of the STP State field to Enabled.
4. Set the path cost for the port between 1 and 65535 in the Cost
field.
5. Set the priority for the port between 0 and 255 in the Priority
field.
6. Press CTRL+S to apply the new settings.
Configure Forwarding and Filtering Table
When a packet hits the Switch, the Switch looks in the filtering
and forwarding tables to decide what to do with the packet; either
to filter it off the network, or to forward it through the port on
which its destination lies. The Configure Filtering and
Forwarding table screen allows you to stop or start address
learning as well as to select an age-out time of the MAC address in
the selected address table. This screen also permits you to access
two additional configuration screens from the menu at the bottom
of the window.
52
Using the Console Interface
Advertisement
Table of Contents
