Gigabit Ethernet Switch User's Guide
SNMP Manager
To use the functions on this screen, enter the desired
community string for SNMP management on the Switch in
the Community String field and the desired Access Right
setting in the next field. You may enter up to four IP
addresses of trap receiving stations in the Trap Manager
window of the Configuration section. Then click Apply to put
the settings into effect.
The information is described as follows:
♦ Community String A user-defined SNMP community
name.
♦ Access Right The permitted access of Read Only or
Read/Write using the SNMP community name.
82
Web-Based Network Management