Table of Contents
Advertisement
You can change the IP Address, Subnet Mask, and Default
Gateway on the Switch. If you are not using BOOTP, enter the IP
Address, Subnet Mask, and Default Gateway of the Switch. If
you enable BOOTP, you do not need to configure any IP
parameters because a BOOTP server automatically assigns IP
configuration parameters to the Switch. Click Apply to activate the
new settings.
The information is described as follows:
♦ IP Address The Internet address for the device.
♦ Subnet Mask The subnet mask determines the level of
the subnet that the Switch is on.
♦ Default Gateway The default router for the device.
♦ Send Bootp Request Upon Power Up Toggle between
Enable and Disable to determine whether the IP address,
subnet
mask,
and
automatically
assigned
manually.
Web-Based Network Management
Gigabit Ethernet Switch User's Guide
default
gateway
settings
by
the
BOOTP
server
are
or
77
Advertisement
Table of Contents
