Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Configure Switch
The Switch Configuration screen shows various pieces of
information about your Switch, and allows you to set the System
Name, System Location, and System Contact. These settings
can be retrieved from the Switch using SNMP requests, allowing
these settings to be used for network management purposes.
Choose Configure Switch to access the second item on the
System Configuration menu. The following screen appears:
Figure 6-10. Switch Configuration screen
The fields you can set are:
♦ System Name Corresponds to the SNMP MIB II variable
, and is used to give a name to the
system.sysName
Switch for administrative purposes. The Switch's fully
qualified domain name is often used, provided a name has
been assigned.
♦ System Location
variable
system.sysLocation
42
Corresponds to the SNMP MIB II
, and is used to indicate
Using the Console Interface
Advertisement
Table of Contents
