Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
♦ Use Config File Determines whether or not the Switch
should download its configuration file the next time it is
booted.
♦ Config File Name The path and configuration name on
the TFTP server.
♦ Last TFTP Server Address The IP address of the TFTP
server where the configuration file was located in the last
configuration change.
Console
This
screen
allows
you
communicating through the console port, Console or SLIP, in
the Serial Port field. Use SLIP for out-of-band management.
You can also specify the refresh rate in the Console
Timeout field and the desired setting in the Baud Rate
field. Click Apply and then reboot the Switch for console port
settings to take effect.
84
to
select
the
protocol
Web-Based Network Management
for
Advertisement
Table of Contents
