Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
4
4
C
T
ONNECTING
HE
S
WITCH
This chapter describes how to connect the TEG-S40SX to your
Gigabit Ethernet network.
PC to Switch
A PC can be connected to the Switch via a fiber optic cable. The PC
should be connected to any of the four ports (1x - 4x) of the TEG-
S40SX.
Figure 4-1. TEG-S40SX Switch connected to a PC or
Workstation (full-duplex mode is required)
The LED indicators for PC connection are dependent on the LAN
card capabilities. If LED indicators are not illuminated after
Connecting The Switch
15
Advertisement
Table of Contents
