Figure 6-22. Ping Test screen
The fields you can set are:
♦ Destination IP Address The IP address to be Pinged.
♦ Repetition Amount of times the Switch should send the Ping
(1-255). If zero is chosen, the Switch will continue Pinging
indefinitely.
In the lower part of the Ping Test screen, you can view the Ping
status, including Result, Reply, Time out, and Unreachable.
SNMP Configuration
The Switch sends out SNMP traps to network management
stations whenever certain exceptional events occur, such as when
the Switch is turned on or when a system reset occurs. The Switch
allows traps to be routed to up to four different network
management hosts.
For a detail list of Trap Types used for this Switch, see Chapter 5,
Switch Management, Traps section.
Using the Console Interface
Gigabit Ethernet Switch User's Guide
59