Table of Contents
Advertisement
Download
Firmware and configuration updating can be done from the
screen above.
The information is described as follows:
♦ Software Update Mode Set to either Network or Out of
Band. Determines whether the new firmware code should
be obtained through the Ethernet network or through the
console port.
♦ TFTP Server Address The IP address of the TFTP
server where the new firmware code is.
♦ Firmware Update Determines whether or not the
Switch should download its new firmware code the next
time it is booted.
♦ File Name The path and the name of the file which holds
the new firmware code on the TFTP server.
Web-Based Network Management
Gigabit Ethernet Switch User's Guide
83
Advertisement
Table of Contents
