Table of Contents
Advertisement
♦ CRC + Alignment Counts otherwise valid frames that
did not end on a byte (octet) boundary.
♦ Late Collision Counts collisions that occur at or after
the 64
byte (octet) in the frame. This may indicate that
th
delays on your Ethernet are too long, and you have either
exceeded the repeater count or cable length specified in
the Ethernet standard.
♦ MAC Received Error Counts bit patterns with illegal
encodings. This may indicate noise on the line.
♦ Oversize Frames
longer than 1518 octets (excluding framing bits, but
including FCS octets) and were otherwise well formed.
♦ Received Bad Fragments The number of good frames
with length less than the 64-byte (octet) minimum defined
by the Ethernet standard. These are usually caused by
collisions.
♦ Total Errors
The sum of the CRC + Alignment, Late
Collision, MAC Received Error, Oversize Frames, and
Received Bad Fragments counters.
♦ Collisions
The best estimate of the total number of
collisions on this Ethernet segment.
Web-Based Network Management
Gigabit Ethernet Switch User's Guide
Counts packets received that were
99
Advertisement
Table of Contents
