Table of Contents
Advertisement
Figure 3-3. Right side panel view of the TEG-S40SX
♦ System Fans These fans are used to dissipate heat. The
sides of the system also provide heat vents to serve the same
purpose. Do not block these openings, and leave adequate
space at the rear and sides of the Switch for proper
ventilation.
Be
reminded
dissipation and air circulation, system components might
overheat, which could lead to system failure.
LED Indicators
The LED indicators of the Switch include Power, Console,
Link/Act, and Full. The following shows the LED indicators for the
Switch along with an explanation of each indicator.
Figure 3-3. The TEG-S40SX Switch LED indicators
♦ Power After turning on the power, the Power indicator on
the front panel should light to indicate the Switch is loading
Identifying External Components
Gigabit Ethernet Switch User's Guide
that
without
proper
heat
13
Advertisement
Table of Contents
