Table of Contents
Advertisement
0
A
BOUT
This User's guide tells you how to install your TEG-S40SX stand-
alone Switch, how to connect it to your Gigabit Ethernet network,
and how to set its configuration using either the built-in console
interface or Web-based management.
Terms
For simplicity, this documentation uses the terms "Switch" (first
letter upper case) to refer to the TEG-S40SX Gigabit Ethernet
Switch, and "switch" (first letter lower case) to refer to all Ethernet
switches, including the TEG-S40SX.
Overview of this User's Guide
♦ Chapter 1, Introduction. Describes the Switch and its
features.
♦ Chapter 2, Unpacking and Setup. Helps you get started with
the basic installation of the Switch.
♦ Chapter 3, Identifying External Components. Describes the
front panel, rear panel, and LED indicators of the Switch.
♦ Chapter 4, Connecting the Switch. Tells how you can connect
the TEG-S40SX to your Gigabit Ethernet network.
About This Guide
Gigabit Ethernet Switch User's Guide
T
G
HIS
UIDE
v
Advertisement
Table of Contents
