Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Figure 6-5. Add/Modify User Account screen
3. Type in your Username and press Enter.
4. If you are a new user, type in the Old Password and press
Enter.
5. Type in the New Password you have chosen, and press
Enter. Type in the same new password in the following field
to verify that you have not mistyped it.
6. Determine whether the new user should have Normal User
or Administrator privileges.
7. Choose the APPLY command to let the password change
take effect.
This method can also be used by an Administrator-level user to
change another user's password.
36
Using the Console Interface
Advertisement
Table of Contents
