Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Then, use the screws provided with the equipment rack to mount
the Switch in the rack.
Figure 2-2B. Installing the Gigabit Ethernet Switch in an
equipment rack
Power on
The TEG-S40SX Switch can be used with AC power sources 100 -
240 VAC, 50 - 60 Hz. The Switch's power supply will adjust to the
local power source automatically and may be turned on without
having any or all LAN segment cables connected.
After the device is powered on, the LED indicators should respond
as follows:
Unpacking and Setup
9
Advertisement
Table of Contents
