Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
First Time Connecting To The Switch
The Switch supports user-based security that can allow you to
prevent unauthorized users from accessing the Switch or changing
its settings. This section tells how to log onto the Switch.
Note:
The passwords used to access the Switch are case
sensitive; therefore, "S" is not the same as "s."
When you first connect to the Switch, you will be presented
with the first login screen (shown below). Press Ctrl+R (hold
down the Ctrl key, press the R key, and release both
keys) to call up the screen, if the initial login screen does
not appear. Also Ctrl+R can be used at any time to
refresh the screen.
Figure 6-1. Initial Screen, first time connecting to the Switch
Press Enter (Note: Leave the Username and Password fields
blank). You will see the main menu shown below:
Using the Console Interface
31
Advertisement
Table of Contents
