Clearing Jammed Roll Paper
If paper from a roll becomes jammed, Paper Jam / Press ↑ Key is shown on the Display Screen of the
Control Panel. Remove the jammed paper as follows.
Note
•
For instructions on removing a paper jam from a roll if the scrap of paper remains in the Paper Feed
Slot, see "Clearing Jammed Paper (Paper Feed Slot)". (→P.125)
1.
Open the Roll Feed Unit Cover. Use a store-bought cutter or the like to cut the paper of the
loaded roll.
Caution
•
When cutting paper, be careful to avoid injury and damaging the printer.
2.
Press ▲ button.
3.
Remove the jammed paper.
•
If paper is jammed inside the Top Cover
1.
Open the Top Cover and move the Carriage to the side.
2.
Clear any jammed paper from inside the Top Cover.
After removing the paper, make sure there are no other scraps of paper in the printer.
Problems Regarding Paper
Troubleshooting 641
Need help?
Do you have a question about the imagePROGRAF iPF510 and is the answer not in the manual?
Questions and answers