Canon imagePROGRAF iPF510 User Manual page 606

Adjusting the feed amount
5.
Examine test pattern A for band adjustment. After you determine the pattern in which streaks are
least noticeable, press ◄ or ► to choose the pattern number, and then press the OK button.
Test pattern B is printed for band adjustment.
Note
•
If you cannot determine the pattern in which streaks are least noticeable, choose an intermediate
value. For example, choose 11 if you cannot decide whether pattern 10 or 12 is better.
6.
Examine test pattern B for band adjustment. After you determine the pattern in which streaks are
least noticeable, press ◄ or ► to choose the pattern number, and then press the OK button.
The feed amount is adjusted, and the printer goes online.
If printed documents are still affected by uneven contrast or banding in different colors at regular
intervals after this adjustment, you can adjust the feed amount during printing. (→P.593)
592 Adjustments for Better Print Quality
Adj.Setting
=8
Adj.Setting
=8