Can't Detectpapr; Cutting Error; Feed Limit - Canon imagePROGRAF iPF510 User Manual

Messages regarding paper

Can't DetectPapr

The paper has come out of the printer.
A paper jam occurred in the printer.
The roll cannot be correctly detected.

Cutting Error

There are sheets left on the Output Tray.
There is a foreign object by the Output Tray,
obstructing the Cutter Unit.
You are not using the printer under the recommended
environmental conditions for the paper.
You are using paper that is not compatible with
automatic cutting.
The Cutter Unit stops in the middle of cutting.
In other cases, the Cutter Unit may be damaged.

Feed Limit..

You are pressing the ▲ button on the Control Panel
and trying to rewind the roll completely.
688 Error Message
Cause
Cause
Cause
Corrective Action
Remove the paper that has come out of the printer,
press the Online button, and reload the paper.
(→P.82)
(→P.89)
Remove the jammed paper, press the Online button,
and reload paper.
(→P.122)
(→P.174)
(→P.169)
Rewind the roll manually until the paper caught in
the rollers is completely out of the rollers. Press the
Online button and reload the roll.
Corrective Action
Remove the paper.
Remove the foreign object.
Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see "Types of Paper". (→P.103)
Cut the roll manually.
(→P.131)
Move the Cutter Unit to the left, and then remove the
roll paper. If the roll cannot be cut using the Cutter
Unit, cut the roll manually.
(→P.131)
Contact your Canon dealer for assistance.
Corrective Action
Release ▲.