Other Messages
GARO Wxxxx (x represents a number)
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
In the following situations, turn off the printer and wait at least three seconds before restoring power.
If the message is still displayed, write down the error code and message, turn off the printer, and contact your
Canon dealer for assistance.
•
Error notication ("ERROR") is displayed with the error code on the top line of the Display Screen and a
message on the bottom of the Display Screen.
Close UpperCover
The Top Cover is open.
Consumables Low
It is almost time to replace consumables for which
service is required.
Repl Consumables
It is past the recommended time to replace
consumables for which service is required.
Cause
ERROR Exxx-xxxx
Call For Service
Cause
Cause
Cause
Corrective Action
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired
printing results.
Corrective Action
Close the Top Cover.
Corrective Action
If Repl Consumables is displayed, you can continue
to use the printer for some time.
Contact your Canon dealer for assistance.
Corrective Action
Contact your Canon dealer for assistance.
Other Messages
Error Message 697
Need help?
Do you have a question about the imagePROGRAF iPF510 and is the answer not in the manual?