Specifying The Cutting Method For Rolls - Canon imagePROGRAF iPF510 User Manual

Specifying the Cutting Method for Rolls

How a roll is cut after ejection varies depending on the printer settings.
Cutting Method
Automatic Rolls are automatically cut by the Cutter
Unit.
Eject Choose this setting if you prefer not to
(→P.132) have documents dropped immediately after
printing, as when waiting for ink to dry.
To cut the roll paper using the Cutter Unit,
hold down the Stop/Eject button for a
second or more.
Manual Choose this setting when using paper or
(→P.133) media that cannot be cut using the Cutter
Unit.
Cut each page from the roll using scissors.
For continuous printing (if you will cut each
page later), in Auto Cut, select Yes, or
select Print Cut Guideline.
(→P.437)
Paper Choose this option if you want to cut pages
Cutting by pressing Cutter Unit buttons for manual
(→P.134) cutting after printing when the printer driver
is congured to Auto Cut > No or Print
Cut Guideline.
Otherwise choose this option if you want to
cut the roll edge after loading a roll.
Note
•
Automatic and Eject are valid only when you have specied Auto Cut > Yes in the printer driver.
•
With Eject, printing does not resume after a series of jobs have been printed continuously until the
roll is cut.
Cut roll paper manually in the following cases:
Menu Settings
Cutting Automatic
Mode
Eject
Manual
Paper Cut Yes
Handling rolls
Driver Setting
Auto Yes
Cut
Yes
NoYesPrint
Cut Guideline
NoPrint Cut
Guideline
Handling Paper 131