Handling sheets
Selecting the Paper Source
When advancing paper, press the Feeder Selection button and select the source.
You can determine the selected source by checking which lamp is lit-either the Auto Feed lamp (a) or the Paper
Tray lamp (b).
•
Auto Feed lamp : Selected when printing on Roll Media or the Cassette.
•
Paper Tray lamp : Selected when printing on Sheets from the Top Paper Feed Slot or Front Paper
Feed Slot.
Note
•
If any paper is loaded that will not be used, a message is shown on the Display Screen (either Remove
RllMedia? or Remove CutSheet? ) when you press the Feeder Selection button.
To remove the paper, press the OK button. (→P.141)
•
You cannot switch the paper source in the following situations:
•
If the Message lamp is ashing
Check the message on the Display Screen and take action as necessary. (→P.674)
•
If the Data lamp is ashing
Select the paper source after printing.
•
If a printer menu operation is in progress
Select the paper source after the menu operation.
•
When in the process of loading paper
Finish loading the paper before selecting the paper source.
•
When in the process of replacing Ink Tanks
Finish replacing the Ink Tanks before selecting the paper source.
•
If the Top Cover is open
Close the Top Cover before selecting the paper source.
Handling sheets
Handling Paper 145