The Surface Of The Paper Is Dirty; The Back Side Of The Paper Is Dirty - Canon imagePROGRAF iPF510 User Manual

The surface of the paper is dirty

The Paper Retainer is soiled.
You are using a paper that does not dry easily.

The back side of the paper is dirty

The Platen has become dirty after borderless printing
or printing on small paper.
The Paper Retainer is soiled.
Roller marks are left across the trailing edge of paper
A document was removed after printing from the
Front Paper Feed Slot without pressing the ▲ button.
Fine Scratches Appear on Glossy Paper from the
Cassette
When glossy paper is fed from the cassette, paper
dust or other debris on the guides or in the paper path
that turns paper around may damage the surface of
glossy paper.
Cause
Cause
Cause
Cause
Problems with the printing quality
Corrective Action
Clean the Paper Retainer.
(→P.630)
Specify a time of about a minute in Roll DryingTime.
Corrective Action
Open the Top Cover and clean the Platen.
(→P.627)
Clean the Paper Retainer.
(→P.630)
Corrective Action
Following the instructions, press the ▲ button,
remove the paper, and then press the ▼ button.
Wipe away any soiling on the rollers.
(→P.627)
(→P.630)
Corrective Action
It may help prevent scratches from the paper path if
you print glossy paper from the Top Paper Feed Slot
instead.
(→P.89)
Troubleshooting 659