Messages regarding paper
PaprSiz Mismatch / Prnt:PressOnline
The sizes of paper specied in the printer driver and
on the printer do not match when Fit Roll Paper
Width is selected in the printer driver.
Paper Too Small / Please Check
The loaded paper is smaller than the minimum size
supported by the printer.
Paper Too Large / Please Check
The loaded paper exceeds the maximum size
supported by the printer.
Papr Size Undetected
Paper has been loaded askew, or warped paper has
been loaded.
Need A4/Letter Vert. or Larger
Paper too small for the printer has been loaded.
Need 10 in or Larger Roll
Paper too small for the printer has been loaded.
680 Error Message
Cause
Cause
Cause
Cause
Cause
Cause
Corrective Action
1.
Hold down the Stop/Eject button for a second or
more to cancel printing.
2.
Try printing again after adjusting the paper size
as specied in the printer driver and the size
specied on the printer so that they match.
Press the Online button to resume printing. However,
this may cause a paper jam or printing problem.
Corrective Action
Press the Online button to clear the error message.
For details on supported paper sizes, see "Paper
Sizes". (→P.109)
Corrective Action
Press the Online button to clear the error message.
For details on supported paper sizes, see "Paper
Sizes". (→P.109)
Corrective Action
Reload paper straight, in the correct position.
(→P.152)
(→P.117)
(→P.155)
Corrective Action
Replace the paper with A4/Letter (vertical) or larger.
(→P.109)
Corrective Action
Load a roll 10 inches wide or larger.
(→P.82)
Need help?
Do you have a question about the imagePROGRAF iPF510 and is the answer not in the manual?
Questions and answers