Lines Are Misaligned; Printing Mode; Thin Lines Are Not Printed After Switching To Economy; Line Thickness Is Not Uniform (Windows) - Canon imagePROGRAF iPF510 User Manual

Problems with the printing quality

Line thickness is not uniform (Windows)

In the Special Settings dialog box of the Windows
printer driver, Fast Graphic Process is selected.

Lines are misaligned

The Printhead alignment is not adjusted.

Thin lines are not printed after switching to Economy

Printing mode

You have selected Economy Printing in the printer
driver before printing.
Problems with the printing quality caused by the type
of paper
For paper-specic troubleshooting tips to improve the printing quality, refer to the Paper Reference Guide.
(→P.103)
664 Troubleshooting
Cause
Cause
Cause
Corrective Action
Open the printer driver's Properties dialog box from
Print in the application software's File menu, and try
printing following the steps below.
1.
Remove the check from Open Preview When
Print Job Starts in the Main sheet.
2.
Remove the check from Page Layout in the
Layout sheet.
3.
Click the Special Settings button in the Layout
sheet to open the Special Settings dialog
box, and remove the check from Fast Graphic
Process.
Corrective Action
Adjust the Printhead alignment.
(→P.581)
(→P.583)
Corrective Action
Clear the Economy Printing check box in the printer
driver and try printing again.