Canon imagePROGRAF iPF510 User Manual page 565

Conguring the Communication Mode Manually
This topic gives instructions for conguring the communication mode manually.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Interface Setup, and then press ▼.
3.
Press ◄ or ► to select Ethernet Driver, and then press ▼.
4.
Press ◄ or ► to select Auto Detect, and then press ▼.
5.
Press ◄ or ► to select Off, and then press OK.
The setting is updated, and an equals sign "=" is displayed at left.
Return to the Ethernet Driver menu.
6.
Press ◄ or ► to select Comm.Mode, and then press ▼.
7.
Press ◄ or ► to select the communication mode, and then press the OK button.
The setting is updated, and an equals sign "=" is displayed at left.
Return to the Ethernet Driver menu.
8.
Press ◄ or ► to select Ethernet Type, and then press ▼.
9.
Press ◄ or ► to select the Ethernet type, and then press OK.
The setting is updated, and an equals sign "=" is displayed at left.
Return to the Ethernet Driver menu.
MAIN MENU
Interface Setup ↓
Interface Setup
Ethernet Driver ↓
Ethernet Driver
Auto Detect ↓
Auto Detect
= Off
Ethernet Driver
Comm.Mode ↓
Comm.Mode
= Half Duplex
Ethernet Driver
Ethernet Type ↓
Ethernet Type
= 10 Base-T
Network Setting
Network Setting 551