The Front Tray Guides are in the Front Paper Feed Slot.
Paper cannot be ejected because the roll was
advanced when the Front Tray Guides were in the
Front Paper Feed Slot.
Cause
Corrective Action
On the Control Panel, momentarily select POP
Board on the screen for selection of the media type.
The Front Paper Feed Slot will rise, so lift the Vertical
Paper Guides and store them toward the front.
Problems Regarding Paper
Troubleshooting 653
Need help?
Do you have a question about the imagePROGRAF iPF510 and is the answer not in the manual?
Questions and answers