Canon imagePROGRAF iPF510 User Manual page 361

4.
Make sure the Main sheet is displayed.
5.
A
In the Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
6.
After conrming that
list.
7.
Click the Page Setup tab to display the Page Setup sheet.
8.
O
Click Size Options to display the Paper Size Options dialog box.
9.
Complete the following settings in the Paper Size Options dialog box.
1.
Enter a desired paper name in Custom Paper Size Name. "430 mm Square" is used in this example.
2.
Select mm or inch in Units.
3.
Enter "430" [16.9 in] in both Width and Height.
Note
•
If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either
Width or Height, the other value will be automatically applied based on the original aspect ratio.
10.
Click Add to register "430 mm Square."
11.
Click OK to close the Paper Size Options dialog box.
D
Easy Settings is selected, click Scanned Image in the
Printing banners or at other non-standard sizes
Enhanced Printing Options 347
E
Print Target