Messages Regarding Printheads; Printhead / Check Nozzles; Check Printout; Printhead / Please Replace - Canon imagePROGRAF iPF510 User Manual

Messages regarding printheads

Messages regarding printheads
Online Key / and recalibrate
Band Adj Error / Please Readjust
The feed amount cannot be adjusted; highly
transparent lm is loaded.
Printhd Adj Err / Please Readjust
The Printhead nozzles are clogged.
The Printhead cannot be aligned; highly transparent
lm is loaded.

Printhead / Check Nozzles

The printhead nozzles may be clogged.

Check Printout

The Printhead nozzles are becoming clogged.

Printhead / Please Replace

An incompatible Printhead has been installed.
There is a problem with the Printhead.
694 Error Message
Cause
Cause
Cause
Cause
Cause
Corrective Action
Adjust the feed amount manually.
(→P.590)
Corrective Action
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.608)
2.
Clean the Printhead if the nozzles are clogged.
(→P.610)
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.581)
Corrective Action
If printing is faint, clean the Printhead.
(→P.610)
Press the Online button to continue with printing.
However, note that this error may affect the printing
quality.
To cancel printing, press the Stop/Eject button.
Corrective Action
If printing is faint, clean the Printhead.
(→P.610)
Corrective Action
Install a Printhead specied for use with the printer.
(→P.611)
Open the Top Cover. If the Carriage is visible, replace
the Printhead with a new one.
(→P.611)
If, after opening the Top Cover, you see that the
Carriage is not visible, follow these steps.
1.
Close the Top Cover and press the Online button.
2.
Replace the Printhead.
(→P.611)