Handling sheets
•
If paper is jammed in the back of the printer
Remove the jammed paper from the back.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Press ▼.
If paper is jammed deep in the Paper Feed Slot, remove the Roll Feed Unit or Paper Tray Unit and clear the
paper jam as follows.
1.
Turn off the printer and remove the Roll Feed Unit or Paper Tray Unit from the printer.
(→P.142)
(→P.177)
2.
Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer.
3.
Install the Roll Feed Unit or Paper Tray Unit on the printer again.
(→P.143)
(→P.177)
176 Handling Paper
Need help?
Do you have a question about the imagePROGRAF iPF510 and is the answer not in the manual?
Questions and answers