Pr�Nt�Ng From Mac Os 9; Printing From Mac Os; Selecting The Printer - Canon imagePROGRAF iPF510 User Manual

Printing procedure

Printing from Mac OS 9

After selecting the printer in Chooser from the Apple menu, print by using menus in the application software.
Important
•
We recommend exiting unnecessary applications before printing. Running several applications while
printing may interrupt the transfer of print data and affect printing quality.

Selecting the printer

Before printing, you must conrm that the printer is selected in Chooser.
For instructions on selecting the printer, see "Conguring the Printer Driver Destination (Macintosh)". (→P.570)
Important
•
During this setup process, the printer will not be listed in Chooser if it is off or disconnected.
•
By factory default, the AppleTalk protocol is disabled on the printer. You must enable the AppleTalk
protocol before using the printer in AppleTalk network. For instructions on activating AppleTalk protocol,
see "Conguring the Destination for AppleTalk Network (Macintosh)". (→P.572)
Note
•
In Chooser, choose GARO Printer Driver.
•
In Destination, choose USB if the printer is connected via USB, FireWire if connected via IEEE 1394,
or AppleTalk, IP Print, or IP Print (Auto) if connected via network.
•
If the printer is connected via AppleTalk, click Active under AppleTalk in the lower-right corner of
the Chooser window.
•
If the printer is connected via IP Print, click Registering IP Address under the Destination list to
register the printer's IP address, and then click IP Print.
94 Basic Printing Workow