Remov�Ng Heavywe�Ght Paper From The Front Paper Feed Slot - Canon imagePROGRAF iPF510 User Manual

Handling sheets
Removing Heavyweight Paper from the Front Paper Feed
Slot
If you are printing heavyweight paper from the Front Paper Feed Slot, the printer will stop advancing the paper while
the trailing edge is still in the rollers to prevent the sheet from dropping. In this case, remove the paper as follows.
1.
Press the ▲ button.
Note
•
If you load paper from the Front Paper Feed Slot but press the ▲ button without printing, the printer
will eject the paper and stop advancing it momentarily while the trailing edge is still in the rollers to
prevent the sheet from dropping. Press the ▲ button again when you are ready to remove the paper.
2.
Remove the sheet by pulling it forward, keeping it at.
Caution
•
If you do not remove POP Board by pulling it straight forward and keeping it at, the printed surface
may become scratched.
3.
Press the ▼ button.
Caution
•
Always remove the sheet before pressing the ▼ button. If you do not remove the sheet before step
3, the sheet may go back inside the printer, leaving roller marks across the trailing edge of the sheet.
168 Handling Paper