Front View - AMX Precis HT Instruction Manual

Overview & General Specifications
Precis HT Control Features
Precis HT systems support three different protocols: BCS* (Basic Control Structure), XNNet, and
TCP/IP. Several different control options are available. Multiple control methods can be used on the
same system.
* BCS is sent as ASCII characters through the CONTROL port. For information on BCS commands, see
the BCS Protocol Instruction Manual on the AMX AutoPatch CD or at www.amx.com.
Note: Features and specifications described in this document are subject to change without notice.

Front View

The enclosure is the structural basis of Precis HT systems. All Precis HT systems have an integral Precis
X/Y Control Panel for controlling the system's switches and system attributes (FIG. 1). The control panel
can also be used for system verification, redundant control, and troubleshooting. Directions for use are
provided in the "Control Panel Operation" chapter on page 35.
FIG. 1
Front view of Precis HT 12x8 enclosure
For additional control options, see page 12.
8
Simple Touch X/Y Control Panel featuring backlit buttons
AMX control devices (for control programming information, see the instruction manual for
the specific interface)
APControl 3.0 software (free with all systems)
APWeb (TCP/IP control via an external module)
Supports AMX AutoPatch's simple BCS (Basic Control Structure) serial control protocol
Supports AMX AutoPatch's XNNet protocol
Supports third-party controllers
Precis HT Instruction Manual