Front View - AMX Epica DGX 32 Instruction Manual

Control Features for the Epica DGX 32
In addition to the front control panel, which is used for controlling the system's switches and system
attributes, several control options are available. Multiple control methods can be used on the same
system.
* BCS is sent as ASCII characters through the RS-232 port.
Note: Features and specifications described in this document are subject to change without notice.

Front View

The enclosure, which is the structural basis of the Epica DGX 32 Distribution Matrix, can be controlled
using the standard front control panel, control software, or an external controller (for additional
information on control options, see page 13). The Power LED indicates the status of the power supplies.
FIG. 1 Front view of an Epica DGX 32 enclosure
Power LED on Front of Enclosure
The Power LED indicates the power status of the redundant power system within the
Epica DGX 32 enclosure as follows:
Epica DGX 32 Instruction Manual
Front control panel (standard on all enclosures)
Compatible with a number of AMX control devices (for control programming information,
see the instruction manual for the specific interface)
APControl 3.0.1 software (free with all systems) provides easy single-user PC control
Control via NXB-AP-1000 Interface (server connection through TCP/IP port on CPU)
Supports AMX AutoPatch's simple BCS* (Basic Control Structure) serial control protocol
Supports AMX AutoPatch's XNNet protocol
Supports third-party controllers
LCD Control Dial
Control Keys
Green – both power supplies are powered on
Red – one of the power supplies is not receiving power or has failed
Off – both power supplies are not receiving power
Overview and General Specifications
Input Keys Power Indicator
Output Keys
9